[Broadway Bomb 2013] – Saturday – BBQ

After a half hour sprint, everyone needs some fuel. Best part is when your exhausted body has to work another 4 miles to get to that fuel, so our trek towards the BBQ began.

Naturally, we weren’t alone and cruised past Bikes N Boards’ Andy, who managed to mess up his foot right before the bomb and had to be on foot the rest of the weekend, and whom I’d properly meet later on.

I couldn’t resist snapping some pics of the Brooklynscape either.

Water break about halfway was an absolute must too, especially with headwind lagging our arrival.

And finally we made it to the fun madness-

Yet another public service announcement by Ian.

And then the sweet, sweet food-

REY burgers to go with your trucks anyone?

DB boards had a little demo display set up in the grass-

And people were bustin tricks in the basketball court as usual-

And of course the New York’s finest since this was a legal and legitimate after-event

Race naturally wasn’t without some casualties this year either-

And some creative threads were rocked-

Giveaways occurred with the crowds resembling seagulls-

And plenty of usual costumes were worn, since Bomb is skaters’ early Halloween like Comic Con is for us geeks

The mysterious Samurai was there with his Bombin board deco that I saw the night before-

Saw a Flexdex Fat Daddy used right-

And then, unfortunately, BBQ got broken up due to kids climbing the fences of the basketball court, so the afterparties began much earlier than expected. So I set sail once again towards the usual deli across the highway overpass.

Next up, Saturday, the Afterparty.

Advertisements

[Broadway Bomb 2013] – Saturday – The Race

First half of the day including the race was really rough thanks to the booze-a-palooza I had the night before. I barely glued myself off the bed, got ready, threw myself into the subway to hopefully make it to the race…

I surfaced at Times Square, dashed outside, and started skating down Broadway in hopes of catching one of the schools of racers. For the first minute or so, I was out of luck and worried a bit, but after another glance behind they surely appeared. Now it was time to do foot and camera work.

The rest of this was as fun as last year’s race, although I missed the beginning madness. Everyone was pushing hard just to get to the finish.

Chicks and dudes, all sorts of boards imaginable, incredible stoke and plenty of shralp.

Bomb is truly the best event on the east coast that brings all kinds of skaters together to do whatever they want to do. Race, cruise, hang out, its all up to you with this one. A real skate festival that promotes our culture, wrestles with the traffic laws, and gets on the local news every year.

Some of the spectators can be just as ballsy as us skaters, though given the nature of the event I would advise against some of these kinda moves-

All of us have plenty to worry about without people jumping out into our path just to take some cellphone pictures, but publicity is publicity I suppose.

Didn’t quite have to dodge any busses and trucks this year, and best of all the 5-0 was trying to help things finish after their failure at the starting line.

Finish line was bustling and everyone was taking a breather before doing another 4 miles to the BBQ.

Crazy dudes with Pennies. I love those little things, but for the madness that is the Bomb and having a camera out a about it can be a very poor choice of a deck.

There’s Waldo.

And now for another highlight of the weekend- Evolve powered board:

This crazy thing can apparently last a good few hours on battery and sport a whopping 20mph on flat ground! If the price wasn’t an arm and a leg, I would definitely consider something like it for a proper commuting machine.

And then came the time for a grueling 4 mile stretch to the BBQ that was not fun after half-springing about 6 miles down the ‘way.

Next up, Saturday, BBQ.

[Broadway Bomb 2013] – Friday

Last year’s bomb coverage, in case you missed it.

Better late than never, I suppose; and this will be one helluva long story, so here we go:

-Friday, October 9th 2013 – Longboard Loft. ~5PM-

Things kicked off in the afternoon at the Loft with an all-day chill, skate, and contest sessions. I rolled in around 5 to pre-game for the pre-party at *Uncle Funky’s later in the evening. Things were beginning to slowly wind down given that nightly events were all 21+ and youngins were beginning to turn in slowly. I grazed the very end of the hippie jump and the last bits of daylight.

I promptly hopped across the street to hang by the Loft itself and meet some new faces. Stoke for the race was definitely in the air, as was the wait for the official pre-party. I happened to park up next to the lot in the right side of the picture above and conversation leaned towards my Freebomb setup. As I was getting to the middle of my Surf-Rodz story, that came off as poor customer service until the end, no other than Wayne himself presented me with his business card and a welcome to contact him if anything similar happened in the future. Pretty damn rad and random to just bump into the owner of a very prominent precision truck brand just like that. He recognized my board too, since I linked it to SZ’s Facebook page and was featured in one of their post. Couldn’t resist asking for a shot with my deck either-

Next up were a couple of Pork Slaps at Lucky Jack’s next door.

After that I talked to Anvil Longboards and really enjoyed their integrated, motion-activated light system to help stay more visible while skating in the dark-

The kicktail looked very unique and fresh as well, which actually drew me in initially.

Loft was poppin with a usual prize draw and after taking a few snaps, I headed onwards to Funky’s for the real party.

-Friday, October 9th 2013 – Uncle Funky’s. 7PM-

Usual suspects were posted by the entrance and mild skating was happening around. Things were definitely about to get on the way, but little did I know just how gnarly the party was going to be.

Unknown to me then, I met Roberto who would later on become a new friend and a skate partner after the race on the way to the BBQ.

It was awesome seeing another guy rock one of my home boy’s very first setup by the book- Gravity Hypercarve with Gullwing Sidewinders. Visually sluggish, yet practically nimble longer kind of setup.

I ran into Toxic Surf Jim right away and it was great catching up for a few minutes before heading in. Got a fresh vinyl sticker to add to my deck’s belly and keep reppin his brand.

I went ahead inside to find a good parking spot for my plank before things became crowded. Seeing Jeff always makes my day, and he was already busy dishing out refreshments when I got inside.

Party was well under way despite it still being pretty early for a Friday night, but it sure beat waiting on people to start showing up.

It really didn’t take long for everything to become seriously poppin, to a point where re-surfacing turned into a slow moving line, haha.

Kristen, Noel, and Billy (whom I would properly meet the next day) were hanging outside, working the door, and keeping commotion to a minimum to avoid getting the shenanigans broken up by the 5-0.

On one of my fresh air trips, I bumped into REY Trucks themselves, and their setups put a huge smile on my face-

You don’t really see Kracked Skulls decks out on the streets of the east coast all that often, nor do you really see GBomb brackets/Illuminati complete. KS M1 was my very, very first board and the sentimental value in seeing more on the streets is huge for me. GBomb brackets were a crucial part in my latest build, and they too are just as rare of a sight out in the wild. 2 birds with one stone, perfectly done, REY Trucks!

Sooner than later, the outside was probably more packed than the inside of the party-

And the night would not be complete without our keynote speakers on the race the following morning-

Now, the funniest thing of the evening was selling 2 jacks to some random business suits for a generous offer of $8.

The next day’s Samurai skater had a very rad Bomb planted on the nose of his deck, pretty creative and appropriate-

After I barely survived the onslaught of awesome beverages, I decided to wobble my way towards home via Williamsburg detour to close out some bars and call it a very, late night that I would partially regret the next morning due to my inability to get up.

Next up- Saturday, the Race.

Evil Monkey – Kracked Skulls M1 Custom Grip

So my lady friend finally decided to get a proper length board to step up from the PK I gifted her a good while ago. Trick here was a well-built, light, affordable deck and trucks that would feel as close to my Freebomb as possible.

After some thinking, I figured to go with Bennett 6.0s for their insane turning ability and price point and Kracked Skulls M1 40″ given their build quality and prices ($50 for a nimble drop-through with fiberglass? Beat that most other manufacturers!). Irony here, in a way, is that my very, very first board was the same exact thing with extra glass option. I top mounted it solely to avoid wheel bite it was getting even with 70mm wheels.

Following the footsteps of most decks I had to grip myself, this one wasn’t going to go without a proper, thematic design, so after about hour and a half, here we are-

KS-Monkey1_ (1)

KS-Monkey1_ (2)

KS-Monkey1_ (3)

KS-Monkey1_ (6)

Given my friend’s nickname and character, Evil Monkey seemed too appropriate. And since the deck is “M1,” Abrams fit like a glove. Decided to go with the WWII U.S. Army star design for classier and vintage look. Since I had to do the details with a razor blade prior to going out and picking up an Olfa knife to replace my lost one, half of this job wasn’t exactly efficient nor comfortable.

Here’s my M1 and the new brother next to one another:

KS-Monkey1_ (4)

KS-Monkey1_ (5)

Mine has seen quite a bit in its lifetime, including New York Broadway Bomb ’12, shralpit! Also the deck that I got into Shralper’s Union with. Lots of history and good times. Design on mine is very quick and basic because I just wanted to go and start riding it as soon as I got it, heheh.

So, that’s that for this board. Now to let it accumulate mileage, stickers, and bring lots of stoke and good vibes to my friend.

KS-Monkey1_ (7)

Norad Slasher

Semi-accidental, yet super-successful re-build. Decided to throw my Bears back on the Norad to make it feel the way it used to. Instead of a triple-stack of 1/8″ shock pads and 70mm wheels, I had rubber wedges on it from previous tweak and got too lazy to swap the Slashers off (plus to see if they would even work, being 80mm instead of usual 70mm). And, they worked. Worked hella well without any bite too! Now here’s the best part- since these are completely offset wheels, they can influence the stance width drastically; in this case, make a setup running on 180mm hangers feel more like 150mm when flipped inwards, or close to 200 when mounted normally.

So I managed a super-light commuter board on $20 80mm 80A “flywheels” in its intended 150mm stance, but using 180mm trucks.

NoradSlasher

When On a Tight Schedule…

Work as you go, literally.

Grab freshly shipped trucks, haul ass back to metro. Unbox and take some pics after making the train.

CameraZOOM-20130813202223403

CameraZOOM-20130813202230446

CameraZOOM-20130813202259303

Looking good, time to get to work.

CameraZOOM-20130813203503349

Top half done.

CameraZOOM-20130813205032957

And bottom. Pack everything as best you can, and hop off to transfer.

CameraZOOM-20130813211332201

Quick and crappy selfie, why not?

CameraZOOM-20130813211845537

And the semi-totally finished product after surfacing again.

Perfection – FreeBombSZ

Or so I’ll go ahead and call it, since now it’s a crazy fusion of 3 rad brands all in one.

Freebord Mr. Blode 85cm cut to 24″ symmetrically

G Bomb pump and adjustable wedge brackets, wedged at 15* on each end

Surf-Rodz Indeesz w/ 10mm x 70mm axles, 127mm hangers, blue Solidz bushings, SZ 10mm bearings, all set up at 147mm

3dm Avila’s 75mm 77A

FBSZ2

FBSZ1

(This one was featured on SZ Facebook page as well).

FBSZ3

FBSZ4

FBSZ5

And this thing took about a lazy year and a half to put together.

Before the full story, it was approved by Surf-Rodz Wayne himself-

Key component I’ve been lacking were in fact the Indeesz, and I’ll do a brief review with respect to this crazy setup:

Turning radius, stability, and response are off the charts! Half a street turning diameter for a 34″ deck is comparable to perhaps a wider turn on a Penny Nickel, but definitely not any typical longboard. Pumping still hasn’t quite happened, but once up to some speed its definitely there.

This thing can make stupid-quick and tight turns on a dime and thanks to 65mm contact patch and 78A softness, Avila’s will blow up or melt before sliding, thus making this setup incredible for city slicking and general urban skating. 75mm wheel size takes care of 95% of all the road cracks, rocks, and twigs. Awesome! And last but not least, 9.5″ deck width at each end leave plenty of space for feet.

Though it sits a bit higher from my last configuration, Indeesz help balance that out a bit and avoid potentially nasty wheel bite.

All in all, incredible custom deck. Only thing I wish it could still do is stand upright like a Freebord, but that’s a minor little setback compared to its overall feel.

Project Free Bomb

So here it is as a 28″ deck, 38″ complete. Rides incredibly smooth, sits at about ankle height, feels pretty solid, very travel-friendly, and can be dollied uphill.

– G|Bomb Standard Drop bracket

– G|Bomb Pump bracket

– Freebord “Mr Blonde” 85cm x 9.5″ deck chopped to 28″ bottom mounted

– Freebord Slashers 80mm 80a wheels

– (Bear 852 181mm Trucks, though any will do)

FreeBomb1

FreeBomb2

FreeBomb3

FreeBomb4

——————————————————-The Build—————————————————–

My quest to find a good and affordable platform for my G|Bomb brackets is nearing its end, but the first stage was still not nearly as adequate as I had hoped.

This time, I got a Freebord Mr Blonde 85cm (33″) x 9.5″ foot platform. Deck is a solid 7-ply maple symmetrical top-mount with maximum wheelbase. 33″ however, is still way too long for a bomb platform, but makes for a very solid speed board.

So far I drilled the standard truck pattern evenly into it and tested both setups out. Its definitely wide enough and should still have enough of a pumping platform if I chop it down to ~28″. Some people asked me why I went all the way to Freebord for a longboard kind of deck- you can’t beat that construction for $35 clearance on maple decks, especially with good grip and graphics. GBomb’s own decks are QUITE pricey for only 2 more ply, so saving $105 is some good stuff (not to mention absolutely NO need for such a thick plank that’s only 28″ long).

CameraZOOM-20130505115359793

CameraZOOM-20130505132941622

Here it is with G|Bombs-
CameraZOOM-20130505121259453

And top mounted, with an added bonus of being able to dolly it instead of having to carry it up the hills (and I might just miss this fact unless it will end up being the same length post-chop).

CameraZOOM-20130505132824612

**Edit:

So chopped the deck to 28″ and then bottom-mounted on G|Bomb’s. For pumping, overall 38″ is alright-ish, but for pushing on a super-low platform is a pure pleasure. The brackets serve as a nice foot stop/guide and the whole setup does not clip the road board-edge. Quite decent down light hills and with softer wheels formidable on iffy ground. Definitely a contender to Bustin Boards Sportster since I have an option of keeping it 38″ or cutting it down to 36″. All in all, a great replacement/upgrade from my Kracked Skulls M1 and utilization of the G|bomb brackets.

CameraZOOM-20130505224922070

CameraZOOM-20130505225018176

Overdue Penny Killer

Got this ages ago from Churchill MFG to see what all the new hype was about- and it was fully justified. Slightly more accommodating than a Penny, slightly lighter, with concave and tiny nose kick to boot this maple-bamboo toothpick is indeed a worthy Penny alternative (not to mention $40-60 cheaper). I wanted to find it a good first real home and a rider back when I was in Japan, but that didn’t quite happen then and there. Now, a worthy owner emerged and I went ahead and set it all up with a custom grip job to boot.

PK2

Beauty of these micro-cruisers is the relative difficulty in riding them due to the tiny foot platform, and agility due to tiny wheelbase. Getting a good hang of these opens up the world of bigger boards in a much more confident light, otherwise they’re just awesome little transports that can easily fit anywhere.

 

Never Summer 2013 Lineup

Have to say I have mixed feelings about this one, but in a good way. Sad to see my favorites gone- Norad last year, Soldier TM 2 years ago; however, the new decks are definitely keeping up with the current times and thus NS is not lagging behind other manufacturers albeit being quite less known out on the streets.

NS2013Clutch is brand new, mild drop through and drop deck and that’s a first of its kind for NS.

Heist and Concept stay the same, though I personally like Norad for its finesse and length over concept (at least they dropped the pintail, right?) its still nice to see a few oldies stay.

Hoogan is new new new with W concave and twin kicks.

Assault remains like it always has.

Deviant replaces Revolt with W concave and twin kicks. Solid update of the shape right there.

Motive. Now this new little guy is the 3-ply replacement for Norad but only in its thickness. Brand new idea, 33″ length. Makes me really want to try this one since I pretty much know what to expect out of a 32″ class decks and the NS 3-ply fiberglass kind of “flex” and finesse.

Tyrant gets mild updates but remains the same.

Status replaced the lingering Soldier DT it seems. More of a freeride platform now with lots of cuts and gimmicks. This should definitely be a worthy adversary for comparable decks out there.

Lastly another new face- Proto SB. Snowboard shape on wheels, and we’ve seen that idea a few times the past year. All the tech sliders out there should really enjoy this one.